LuxeLogos

Laserliner AC-Check Information The Laserliner AC-Check is a portable device that can be used to test the air conditioning in your home. It can check the refrigerant levels, the efficiency of the compressor, and the overall condition of the system. The AC-Check is a valuable tool for homeowners who want to ensure that their air conditioning system is working properly. Image: Specifications:

AEG BS 18 G Information The AEG BS 18 G is a brushless 18V cordless combi drill/driver that is designed for both professional and DIY use. It is a compact and lightweight tool that is easy to use, making it ideal for a variety of tasks around the home or workplace. Image: Specifications:

Hager ECP310D Information The Hager ECP310D is a 3-phase kWh meter that is direct-connected and has a capacity of 125A. It is a MID-compliant meter, which means that it meets the requirements of the European Measuring Instruments Directive. The ECP310D has a number of features that make it a versatile and reliable metering solution, including: A retro-illuminated display that makes it easy to read the meter's readings in low-light conditions. A 4-wire counter that provides accurate measurements of energy consumption. A frequency measuring range of 45 to 65 Hz. A wide operating temperature range of -25 to 55 degrees Celsius. IP20 protection against dust and water ingress. A DIN-rail mounting for easy installation. The ECP310D is supplied with a number of accessories, including: A mounting bracket A set of screws A set of nuts A user manual Specifications

DeWalt DW985 Information The DeWalt DW985 is a 14.4-volt XRP cordless hammer drill that is designed for heavy-duty drilling and driving applications. It features a powerful motor that delivers up to 30,000 impacts per minute, and a keyless chuck that makes it easy to change bits. The DW985 also has a variable speed trigger and a two-position side handle for added control. Image Full specifications

Testboy TV 465 Information Introduction The Testboy TV 465 is a mains-independent device tester for testing mobile devices in accordance with DIN VDE 0701-0702. It is easy to use, thanks to the preprogrammed or self-defined test sequences, the menu-assisted help function, and the Good/Bad messages. The battery capacity is sufficient for approximately 2600 test objects (depending on the number of measurements). Image

RYOBI RPP750S Information The Ryobi RPP750S is a powerful and versatile electric pole pruner that is perfect for trimming trees and shrubs at heights of up to 10 feet. It features a 750-watt motor that delivers plenty of power for cutting through even thick branches, and a 20 cm blade that provides a long reach. The pole pruner also includes a safety guard and hand guard to protect the user from injury, and a soft grip rear handle for comfortable operation. Image: Full specifications:

Echo CS-400 Information The Echo CS-400 is a mid-range chainsaw that is designed for both professional and homeowner use. It features a 40.2cc 2-stroke engine that delivers plenty of power for cutting firewood, trimming trees, and limbing branches. The CS-400 also has a number of features that make it easy to use and maintain, such as an i-30 starting system, an automatic oiler, and a G-Force Engine Air Pre-Cleaner. Image of Echo CS-400 chainsaw Specifications

ADA COSMO 120 Information the information about the ADA COSMO 120 laser distance meter: Intro The ADA COSMO 120 Video is a professional laser distance meter that combines a digital viewer with a 360° tilt sensor to provide accurate and precise measurements in a variety of conditions. It can measure distances up to 120 meters with an accuracy of ±1.5mm, and it can also be used to measure the inclination of roofs and the area of trapezoids. The ADA COSMO 120 Video is a powerful tool for a variety of applications, including construction, surveying, and home improvement.

Bosch GTA 2500 W Professional Information The Bosch GTA 2500 W Professional is a portable and versatile saw stand that is compatible with almost any miter saw on the market. It is the ideal choice for professionals who need a saw stand that can be easily transported and set up on the jobsite. The GTA 2500 W features a sturdy steel frame with a powder-coated finish for durability. It has a large work surface that can accommodate even the largest workpieces. The stand also features a built-in miter gauge and a fence that can be adjusted to ensure accurate cuts. One of the best features of the GTA 2500 W is its portability. The stand has two large wheels that make it easy to transport, even when it is fully loaded with a miter saw. The stand can also be folded up for compact storage.

Parkside PDSSE 450 C3 Information The Parkside PDSSE 450 C3 is an electric impact wrench that is designed for wrenching off and on nuts and bolts. It has a powerful 450-watt motor that can generate up to 320 Nm of torque, making it suitable for a wide range of applications. The impact wrench also features a variable speed trigger and a reverse function, making it easy to control and use. Image: Full specifications:

Garrett Euro Ace Information The Garrett Euro Ace is a metal detector that is designed for both beginners and experienced users. It is easy to use, yet it has a number of features that make it a powerful tool for finding metal objects. Introduction The Garrett Euro Ace is a mid-range metal detector that is known for its versatility and ease of use. It is a good choice for both beginners and experienced users, and it can be used for a variety of different metal detecting applications.

Laserliner CableChecker Information the Laserliner CableChecker information in 1000 words: Introduction The Laserliner CableChecker is a tool that helps you identify the type and location of cables in walls and ceilings. It uses a laser beam to scan the area, and then displays the results on a screen. The CableChecker is a great way to avoid accidentally damaging cables when you are drilling or renovating. It is also a useful tool for troubleshooting cable problems.

Makita DHR243Z Information Introduction The Makita DHR243Z is a 18V cordless combi hammer with SDS-PLUS chuck. It is a versatile tool that can be used for drilling, hammer drilling, and chiseling in a variety of materials, including concrete, brick, wood, and metal. The DHR243Z is powered by a brushless motor that delivers up to 2.0 Joules of impact energy, making it one of the most powerful cordless combi hammers on the market. It also features a variable speed trigger, a built-in LED light, and a dust extraction port.

Skil 7450 AA Information The Skil 7450 AA is an electric, 430-watt random orbital sander that is perfect for a variety of sanding tasks around the home. It features a 125mm sanding pad, a variable speed control, and a dust extraction port to help keep your work area clean. The sander also has a soft grip handle and a built-in dust filter to make it comfortable and easy to use. Here is a table of the full specifications of the Skil 7450 AA: Feature Spec Power 430 watts Orbital diameter 2mm Speed range 8,000-11,000 OPM Dust extraction Yes Weight 2.3kg Here are some of the features of the Skil 7450 AA:

Einhell TH-BG 150 Information the information about the Einhell TH-BG 150: Introduction The Einhell TH-BG 150 is a bench grinder that is perfect for small jobs such as repairs, shape corrections, and polishing. It is also suitable for corrective work, sharpening, or cutting. The grinder features a powerful 150W motor that delivers up to 3000rpm, making it ideal for a variety of tasks. It is also equipped with two grinding wheels, one coarse and one fine, for different applications. The TH-BG 150 is also equipped with a number of safety features, including adjustable spark reflectors, closed-side guard hoods, and rubber feet to minimize vibration.

Hitachi WH 14 Information the information about the Hitachi WH 14 impact driver: Introduction The Hitachi WH 14 is a cordless impact driver that is designed for professional use. It features a powerful 14.4V motor that can deliver up to 160Nm of torque, making it ideal for driving large screws and bolts. The WH 14 also features a variable speed trigger and a reversing switch, making it versatile for a variety of applications.

Ferm CRM1044 Information the information about the Ferm CRM1044 air compressor: Introduction The Ferm CRM1044 is a powerful and versatile air compressor that is ideal for a variety of home and workshop tasks. It features a 750W motor, an 8-liter tank, and a working pressure of up to 8 bar. The CRM1044 is also oil-free, making it maintenance-free and quiet.

Bosch GEF 7 E Information The Bosch GEF 7 E is a professional-grade electric file that is designed for a variety of applications, including metalworking, woodworking, and plastics. It features a powerful 720W motor that provides a fast and smooth cutting action. The band speed is adjustable from 3.5 to 12 m/s, and the rotational speed is adjustable from 2,800 to 11,000 rpm. This allows you to customize the tool for the specific task at hand. The GEF 7 E also features a number of other features that make it a versatile and user-friendly tool. These include: An ergonomic design with a comfortable grip for extended use A dust extraction port for keeping your work area clean A quick-release lever for easy band changes A 6-position adjustable work angle for versatile positioning A soft-start function for smooth operation The GEF 7 E comes with a carrying case, a sanding band, and a set of wrenches. It is backed by a 1-year limited warranty.

Ridgid R7111 Information The Ridgid R7111 is a heavy-duty 1/2-inch variable speed reversible drill that is perfect for a variety of drilling applications. It features an 8-amp motor with a die-cast all-metal gearbox for high strength and maximum durability. The drill also has a 1/2-inch keyed chuck with an all-metal design for long-term and heavy use, and to secure bit retention. Image of Ridgid R7111 drill Here are the full specifications of the Ridgid R7111:

Parkside PSTD 800 B1 Information The Parkside PSTD 800 B1 is a powerful and versatile jigsaw that is perfect for a variety of woodworking projects. It features a powerful 800-watt motor that can handle even the toughest cuts, and a variable speed control that allows you to fine-tune the cutting speed for different materials. The PSTD 800 B1 also comes with a number of useful features, including a laser guide, LED work light, blower function, and dust extraction port. Introduction The Parkside PSTD 800 B1 is a corded jigsaw that is designed for both professional and DIY use. It is a powerful tool that can handle a variety of tasks, including cutting wood, plastic, and metal. The PSTD 800 B1 is also equipped with a number of features that make it easy to use and safe to operate.

Makita DFR750RTE Information The Makita DFR750RTE is a 18V cordless auto-feed screwdriver that is designed for use with 45-75mm drywall screws. It features a powerful 4-pole motor that delivers a no-load speed of 4,000 RPM, as well as a long screw guide that prevents the screw from kinking or bending. The screwdriver also has a built-in depth stop that allows you to set the exact depth of the screw, and a reverse function for removing screws. Image of Makita DFR750RTE Specifications

Milwaukee M18 Fuel 2788-22HD Information The Milwaukee M18 FUEL 1-1/2" Lineman Magnetic Drill Kit (2788-22HD) is a powerful and versatile tool that is ideal for a variety of applications, including electrical work, metalworking, and construction. The drill features a brushless POWERSTATE™ motor that delivers up to 2x longer motor life and 50% more power than comparable corded drills. The REDLINK PLUS™ intelligence system provides optimized performance and overload protection, while the M18 REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery pack delivers up to 75 holes in 1/4" steel per charge. The drill also features a self-powered magnetic base that provides up to 2,000 lbs. of holding force, making it easy to work on overhead or vertical surfaces. The base is also equipped with AutoStop™ lift-off detection, which automatically cuts power to the motor if the drill is accidentally lifted off the work surface. Other features of the drill include a 2-speed gear box with speeds of 400 and 6...

Ozito OHT-018 Information The Ozito OHT-018 is a cordless hedge trimmer that is designed for light-duty trimming and shaping of hedges and shrubs. It is powered by a 2.0Ah lithium-ion battery, which provides up to 45 minutes of run time on a single charge. The trimmer has a powerful 0.75kW motor that delivers up to 2,300 strokes per minute, making it easy to cut through even thick branches. The OHT-018 also features an adjustable telescopic shaft that allows you to reach high and low branches with ease. Image: Full specifications:

Parkside PFDS 33 A1 Information The Parkside PFDS 33 A1 is a versatile MIG/MAG welding machine that can be used for a variety of applications, including home repairs, metal fabrication, and DIY projects. It features a powerful 33A motor that delivers consistent welds, even in challenging conditions. The machine also includes a number of helpful features, such as a digital display, adjustable wire feed speed, and a hot start function. Introduction The Parkside PFDS 33 A1 is a great choice for anyone who needs a reliable and easy-to-use MIG/MAG welding machine. It is lightweight and portable, making it ideal for use in a variety of settings. The machine also comes with a number of accessories, including a welding torch, ground clamp, and welding helmet.

DeWalt D25899K Information the DeWalt D25899K information in 1000 words: Introduction The DeWalt D25899K is a 21-pound SDS Max demolition hammer that is designed for heavy-duty demolition applications. It features a powerful 1500-watt motor that delivers up to 25 joules of impact energy, making it ideal for breaking concrete, asphalt, and brick. The D25899K also features a non-air pumping beat piece that helps to extend the life of the tool by preventing dust from entering the unit.

Makita BO4555K Information The Makita BO4555K is a 1/4 sheet palm sander that is designed for precision sanding of small to medium-sized surfaces. It features a powerful 200W motor that delivers 14,000 oscillations per minute, providing smooth, even sanding results. The sander also has a dust collection system that helps to keep your work area clean. Image of Makita BO4555K palm sander Specifications

Ferm PSM1025 Information Introduction The Ferm PSM1025 is an orbital sander that is designed for finishing wood and other materials. It features a powerful motor that delivers up to 135 watts of sanding power, and an orbital oscillation rate of 14,000 oscillations per minute. This combination of power and speed makes the PSM1025 ideal for removing paint, varnish, and other finishes, as well as for smoothing out rough surfaces. Image

Makita HM1400 Information The Makita HM1400 is a powerful electric breaker that is designed for heavy-duty demolition work. It has a 1240W motor that delivers an impact energy of 46.8 J, making it capable of breaking through concrete, brick, and other hard materials. The HM1400 also features a comfortable T-grip design and an air cushioned system that helps to reduce vibration and operator fatigue. Image: Specifications:

Hitachi CS33EB 30S Information Introduction The Hitachi CS33EB 30S is a lightweight and powerful electric chainsaw that is perfect for homeowners and professionals alike. It features a 33cc engine that delivers 1.5 kW of power, making it capable of handling even the most demanding cutting tasks. The CS33EB 30S also features a number of safety features, including an anti-kickback chain brake and a low-oil sensor. Image

Prexiso P80 Information the information about the Prexiso P80 laser distance meter: Intro The Prexiso P80 is a high-precision laser distance meter that is perfect for a variety of applications, including construction, carpentry, electrical engineering, and landscaping. It features a measuring range of up to 80 meters, a typical accuracy of ±1.5 mm, and a number of helpful features such as automatic end-piece detection and area and volume calculation.

Wagner W 200 Information the information about the Wagner W 200 paint sprayer: Introduction The Wagner W 200 is a small, portable paint sprayer that is designed for use on small to medium-sized projects. It is powered by a 460-watt motor and has a maximum flow rate of 120 milliliters per minute. The W 200 is compatible with a variety of different paint types, including water-based paints, latex paints, and oil-based paints. It is also compatible with primers, stains, and varnishes.

Einhell TC-AC 190/6/8 OF Information The Einhell TC-AC 190/6/8 OF is a portable and compact air compressor that is ideal for a variety of home, garden, and workshop tasks. It features a 6-liter tank, an oil-free motor, and a pressure regulator that can be adjusted from 0 to 8 bar. The compressor also includes a manometer, a quick coupling, and a set of accessories. Introduction The Einhell TC-AC 190/6/8 OF is a versatile air compressor that can be used for a variety of tasks, including: